Case Studies Showcase

 

Case Study - iView Yoghurt Dispensing Solution
 

Case Study - iView Yoghurt Dispensing Solution
IMO Jeambrun SAS in France were approached by a systems integrator with a customer wanting to manufacture a specialised food packaging machine designed for dispensing yoghurt......Click here to read more.
 

Case Study - i3 Remote Control Radio Towers
 

Case Study - i3 Remote Control Radio Towers
IMO Canada was approached by one of Canadas largest radio and telecommunications providers for technical assistance converting their older relay-based control systems for their analogue antenna arrays......Click here to read more.
 

Case Study - Jaguar VXT Motor Generator Set Solution
 

Case Study - Jaguar VXT Motor Generator Set Solution
The customer - Liberty Specialty Steels - were looking for an energy saving solution that removed the need for a motor generator base load to supply some high frequency hand held grinders...Click here to read more.
 

Case Study - Engineering Education Solution
 

Case Study - Engineering Education Solution
The customer - a French Technical School of Engineering - had a requirement for a range of products to construct their student teaching machine. The teaching machine needed to be fully functional in order to train students on the programming of various industrial automation products.....Click here to read more.
 

Case Study - Jaguar VXH Heating & Ventilation Solution
 

Case Study - Jaguar VXH Heating & Ventilation Solution
The customer - a London-based European Bank - approached TH Electrical Ltd from Colchester to carry out some repairs on their existing HVAC system which was located on the 5th floor roof. The existing system which used a Tasc Variable Speed Unit that employed an electromagnetic coupling...Click here to read more.
 

Case Study - iSmart Training Centre Lighting Solutions
 

Case Study - iSmart Training Centre Lighting Solutions
The customer - Liberty Specialty Steels - were looking for a lighting solution for their apprentice training centre. The 25 year old system which needed replacing, utilised high bay light fittings which were left on all the time, even though the training centre operated from 8am to 6pm...Click here to read more.
 

Case Study - SD1 Diamond Wire Quarry Machinery
 

Case Study - SD1 Diamond Wire Quarry Machinery
The customer, one of the largest manufacturers of automation machinery for use in the stone field, required a dual solution for one of their marble cutting machines. After careful evaluation, the customer opted to utilise two IMO SD1 AC variable speed drives...Click here to read more.
 

Case Study - Solar Cube Canada
 

Case Study - Solar Cube Canada
IMO Canada was approached to offer a reliable solution for solar tracking control to replace existing programmable relays and time-based PLC tracking controls. The client indicated a large number of high quality; 2 axis solar arrays built on rural and farm properties that were starting to fail.......Click here to read more.
 

Case Study - i3A Solar Thermal Solution
 

Case Study - i3A Solar Thermal Solution
The customer is a competent and successful designer and installer of solar thermal systems. On receiving an out of the ordinary large system enquiry he contacted IMO to discuss their range of combined HMI and PLC controllers....Click here to read more.
 

Case Study - i3A Lobster Containment Solution
 

Case Study - i3A Lobster Containment Solution
The customer required remote alarm messaging in case of any critical system faults to a sometimes unmanned live Lobster containment facility...Click here to read more.
 

Case Study - i3C Vineyard Irrigation Solution
 

Case Study - i3C Vineyard Irrigation Solution
The customer required improved Vineyard irrigation system control and diagnostics from the standard conventional controller. After a customer consultation the i3C was deemed the most suitable and cost effective solution...Click here to read more.
 

Case Study - i3 Biomass Solution
 

Case Study - i3 Biomass Solution
The OEM had a requirement for a control system capable of operating as "standalone" or as part of a networked system, where remote monitoring/support could be offered. The IMO i3 range of Integrated Controller easily satisfies this requirement, with its easy to use programming software and remote connectivity packages. The IMO solution is the solution of choice for OEM's...Click here to read more.
 

Case Study - i3C BMS Solution
 

Case Study - i3C BMS Solution
The client required a replacement BMS controller to replace the existing ineffective unit. After a site survey, the integrator selected an IMO Intelligent Control Station (i3) as an ideal solution for the application...Click here to read more.
 

Case Study - i3D OEE Data Collection
 

Case Study - i3D OEE Data Collection
To improve productivity the client wished to monitor overall equipment effectiveness of the grain processing and cleaning line. The client preference was to use the i3D integrated controller with iSmart intelligent relays to collect the digital input data...Click here to read more.
 

Case Study - i3D Robot Pick & Place Solution
 

Case Study - i3D Robot Pick & Place Solution
The end user required a system to replace a complicated robot interface and machine operating system which was difficult to use. After a site survey, the IMO integrator selected the i3D as the ideal solution, owing to its 10.4" touchscreen display and multiple communications options...Click here to read more.